Tuesday, June 21, 2011

red_heads_setup

Recently I took another shot for my red-heads series:

IMG_6602.jpg

and I managed to snap a wide angle shot of the lighting setup I wanted to share:

DSCF1905.jpg

On the far left, you can see one of the Quadras, this one was plugged into the B port, so it's pumping out half the light of the main, all the way in the upper right, which is shooting through the 1.5 meter Softlighter. The back light is directed through a white scrim on an aluminum frame. I have both scrims on it, one on each side, to soften as much as possible. This is providing the pure white background of the image. Then the Softlighter is from directly in front and above, at a 45 degree angle, providing the main light.

Tuesday, May 17, 2011

second_shoot_with_x100

DSCF1402.jpg

Last weekend I did a portrait shoot with a friend who is graduating (hence the traditional hat). He wanted some images to use for both the graduation brochure, as well as facebook all done at the same time. I had a few locations scouted beforehand that would work well, and asked him to bring his graduation suit and hat, plus a few other outfits in case we needed to switch.

The light cooperated and was quite nice, soft and directional, and it got sunny toward the end right when we needed it. I directed his poses while keeping the light's direction in mind to hit his face in a pleasing way, mostly choosing short lighting, as I prefer (short lighting is where the front and far side of the face are lit, and the close side of the face you can see is in shadow, apposed to broad lighting where the front and front side are lit and the far side you can't see is in shadow), I had the X100 on one shoulder, and my 5D with 85mm 1.8 on the other. With both I shot at maximum aperture, the X100 had way way less purple fringing and was much sharper at it's max aperture of f/2 than the 85 was, but I probably should have stopped the 85 to f2 as well for a sharpness increase, but I wanted the shallowest DoF possible.

For the first image in the blog, I was sitting on the ground (in order to make him look more grand and tall, and to get mostly sky in, rather than boring ground), with the X100. I had the 3rd gridlines projected so I could put his face in one of the points of power, as it was a wide shot and I needed help guiding the eye to his face. The light was coming from the left (his right), so I had him turn in that direction. With guys I normally try to get them to stand naturally with toes slightly turned out, and ask them to bring their shoulders up and back, but then try to settle so they are comfortable and not stiff. Early on I tell them I will be directing their face turn for lighting purposes, so it's easy to use my index finger to ask them to turn closer to me or further away. Sometimes I use the command, "Ok, now with only your eyes, look at me", otherwise they will turn their whole head from the previously chosen position. For postwork, I adjusted contrast and clarity, white balanced it to be a bit less blue, then added one adjustment brush to the sky to bring it down and add contrast, clarity, and a bit of blue, and another adjustment brush on his face to bring it up, add clarity, and increase saturation a bit.

DSCF1397.jpg

In this one I was kneeling, as I wanted both sky and ground, as I found this grass path to be a great setting. The light was coming from the right, so I positioned him this way so it lit his face in short lighting again, this is why the front of his face is brighter, giving it volume. If we were turned the other way, (to the left) this soft light would hit the back of his head, giving his skull volume, but leaving his face relatively flat. In post, I desaturated the greens a bit, as it was overwhelming the scene, cloned out a few distracting clumps of grass, used an adjustment brush to bring down the sky and add a bit of blue, and up clarity, and then overall scene contrast and clarity adjustments. I also have a special sharpening setting that adds micro volume, rather than really sharpening the edges too much. It uses a very wide radius, and a high masking value so only hard edges are affected, and in a broad, rather than narrow way. I apply this to every image, and change the amount depending on the output size (full amount for the web, 30% for full sized prints).

I love how sharp the X100 is at f/2, with no chromatic aberations or purple fringing. It allowed me to throw the background slightly out of focus for some nice subject separation, while still viewing the background's contents.

Just to follow up on my last post about focal lengths, here are two shots in the same location. First with the 85mm lens on the 5D and second with the 35mm X100:

IMG_6565.jpg DSCF1419.jpg

The one with the 85 is tight, and is definitely about the subject as a portrait. It's flattering and cinematic. The 35 is wider and shows the entire cityline of Reykjavik. Neither is better or worse, but they both offer different things. One is a portrait that could be made in any city though, and the other was definitely done in Iceland. (the dark square on the far right is Harpa, the new opera house, and the grey point above it is Halgrimskirkja, the most famous landmark in Reykjavik, the tall dark apartment buildings are also very iconic as part of the beachfront skyline)

DSCF1409.jpg

Not the most masculine of poses, but I think it works. The mountains in this direction behind him were so beautiful, and the light was still cooperating. In odd poses like this, it's really important to ask the subject to "settle in" so they feel comfortable. You can see a noticeable difference after they do it, much more relaxed. I might fine tune a pose, but before I take the photo I ask them to get comfortable so it doesn't look too stiff and awkward.

Monday, May 9, 2011

focal_lengths

I was going to write up a forum post about lens lengths, but I figured this would be a good topic for here instead.
I shoot with 3 lens focal lengths, 35mm, 50mm, 85mm. If shooting on a crop sensor, to emulate this setup, you'd need a 24mm, 35mm, and 50mm lens. These correspond to moderate-wide, normal, and short telephoto. What do I mean by this? Normal means that size ratios line up with what our eyes are used to. Put a person 3 meters in front of a known object like a fire-truck, or a door, and the ratio of the two in how the lens renders them on the camera's 2d plane will look just as our eyes see. Wide means now that far object will look a bit smaller than it should, but since 35 is only moderate wide, you can kind of get away with it. In many situations with a person in the frame, 21/24/28 will look distorted and unnatural. I personally don't like them, but many do. Short-telephoto means that the ratio between objects will slant the other way. The firetruck would look slightly too large, for example. This can be used to one's benefit as well with very long telephoto lenses, keeping the moon huge behind a person, or compressing landscapes, but I find short telephoto gives the affect the way I want it. Off, but not too off as to mis represent reality.
The reason I keep to 3 primes like this, rather than a zoom that encompasses them all like the 24-70mm 2.8, or on a crop, the 17-50/55 from tamron/canon (both good), is because first and foremost, I routinely shoot in lighting situations where I need the extra light. All 3 of my primes are sub f/2 and useable at max aperture. The 35 on my 5D is f/1.4, the 50 and 85 both 1.8. My X100 is 35mm f/2. I find 2.8 too slow for many situations. Secondly, I like having the space between focal lengths. It makes the decision making easier. Expanded, normal, or compressed perspective? With a zoom it's more of a spectrum with lots of choices. Many people like that, but I don't. Creatively I only ever want one of those 3 settings, and having them in set steps helps me focus. In addition, having an out of focus background becomes more difficult the wider your lens goes. So while an 85mm F/2.8 can still give you a headshot with a blurry background, a 35mm f/2.8 at normal viewing distances doesn't really. 50mm 2.8 is kind of mixed bag depending on distance from you to the subject whether you will get background blur or not, but at any distance, F/1.8, 1.4 or even 1.2 will give you much more.
Now for some examples:
35mm

35mm really allows you to get a sense of this space. 50 or 85 would have compressed it too much. You would have only gotten a small edge of the front flower box with 50, less of the branches at the top, and the white area in the back would have been projected physically larger in relation to him, making it more of a middle or high key shot instead of this smoky dark look. Backing up to make 50 work would have made him much smaller and it would no longer really be a portrait. 85 would have made all these issues worse. 35mm gives you a sense of setting.

50mm


This one needed a lot of size ratios going on, and it was already unrealistic and surreal to begin with, so I didn't want to muck with perspective at all, hence the 50mm. 35mm to keep him this size and the front bench would curve away, and the back benches would be very small, and the path wouldn't look very deep or three-dimensional. 85mm would not have shown the side-most benches at all, and the background would look very large and tunnel like. In order to get the whole bench in, I'd need to back up a lot from where I was with the 50, and that would require him being much smaller in the frame.

85mm


This one, the background was very important to the shot. That far building over his right (our left) shoulder is the Dom Cathedral in Cologne, Germany. With a 50 or 35mm, it would have been projected incredibly tiny, and the darker areas around him of the less populated residential area of Cologne would have shown more, making it a less bright and less city-ish feel. He was also on a cramped balcony and I was inside the apartment shooting out. A 50mm might have allowed me to still get all of him without showing the door frame or other parts of the balcony, but the 35 definitely would have unless I got so close as to make him look very distorted.

I chose these three shots specifically because I had decided on the lens focal length before even getting to the location to shoot (or from the original location scout) but they were specifically picked for their affect on perspective. Also because all three relied on fast, sub-f/2 apertures, as all 3 were shot at the widest aperture, either to let in enough light on the 2nd two, or the provide a bit of background blur on the first. Could I have shot these same images with a zoom and had them look very similar? Possibly, but my creative process doesn't work that way, and I like the freedom that this limitation actually brings creatively.

Wednesday, April 20, 2011

x100_and_natural_light

DSCF0589-Edit.jpg

Long time no post. I set my sites on a new camera, and my old one became a neglected orphan on the shelf till I got the new one. It was stupid, but I kept thinking of ideas and how I wanted to do them with the new camera, not the old. But, that time is past, I have the new camera and have been shooting a lot. Mostly non portraiture with no lighting, but if you are curious, check it out here. Low on commentary, big on photos.

A friend of mine who I'd shot before, but never one on one, emailed me asking to do a shoot. I had a free Sunday and started thinking of ideas so I said yes. Immediately I thought of how I wanted to shoot in the cemetery near my house again. I had two images start to coalesce in my head. The first was in black, and something to do with mourning. I wasn't sure the pose, but in my head it seemed it would be standing and looking wistfully at a gravestone. We tried that early and it was so painfully cliche we moved on quickly. I saw this moss covered wall and knew it would work well.

For the lighting, it was a very overcast day. No flashes used. I wanted to find an area where we had a bit heavier tree coverage overhead, with a more open space further out. This would give some shadows in the front, and a rim-light type soft light coming from the background. This would also give a high-key background so the foreground could anchor with a bit more shadows.

I let the camera meter everything, which fit all the values in. Her skin is slightly over exposed, but I like the look it gives next to the dark dress. The post work was simple. I cloned out a small strap on the skin, removed a blueish cast from the dress and used curves to darken it a little. The wall she is laying on had the contrast bumped, it was sharpened an extra amount so her skin would look extra soft in contrast to it, and the green moss under the small of her back I bumped a little with a curve so it emphasized the line of her body. On her face I did a small amount of blemish removal, and evening of the makeup color around the forehead. Very little body touchup in comparison to many of my images. I also made a selection along the silhouette of her body, and darkened the background using an exposure layer, so that she would pop a bit more, light against dark.


DSCF0602-Edit.jpg

After the first half of the shoot we walked back to my house to warm up, change outfits, and I wanted to get a wooden chair as a prop. I had envisioned something like this shot in mind, though her outfit was of her choosing, it fit what I wanted as a timeless sort of feel. I wanted a setting with a bit of framing. Something on both sides, and a branch at the top anchoring downwards, so I could go really wide while still having her stay the focal point. The focus was actually missed on this, it was far forward, but I loved what it did for her skin and hair, very glowy and soft. I used photoshop's lens blur function to hide this fact by blurring the front so it feels like the focus is where it should be.

For post work, I added an exposure layer that darkened and roughly outlined her hair, as the line between hair and glowy background wasn't as strong as it needed to be. I added a yellow layer set to screen, and adjusted it's clipping properties to only affect the lightest areas of the image, and masked it away from her body so it didn't affect the skin. This warmed the image slightly. I then did the same thing with a purple layer to cool the shadows so the image would have a balance.

Monday, January 17, 2011

photo_book

This is a bit old, from 2008, but I have ordered several copies for myself and family, and the quality of the prints are really nice. All the photos are full page, no text to distract, left side is from Finland, right side from the Ukraine. I have enabled the full preview, so what you see is what you get. It's easy to share, so I figure why not?

This one is new, from just before Christmas.

Monday, November 22, 2010

svavar_shoot

svavar.jpg

Settings: Ambient is underexposed by 1/2 stop, and face is properly exposed using a small gridded softbox just outside frame left.

I saw this location when walking back to work from a coffee shop and knew I had to do a shoot. Their are boulders embedded in the wall, and ivy growing along the side. many of the boulders are high enough I knew I could crop out the ground and remove the sense of how high it was. I asked a friend to sit for me, and asked him to wear a suit. He told me he only had an older ill-fitting suit, but knowing his look, I thought it might work. He showed up in these ratty shoes, and at first I was a bit disappointed, but I think they work with the look. Newer shoes would have shown how disheveled the suit is.

Lighting was simple. I set my camera on a tripod and got the framing I wanted. At first I was using my 85mm lens to flatten everything, but I wanted to see a bit more of the wall, so I switched to my 50mm, which let me go closer and keep him larger in the frame while still showing a lot of the wall. Once I had that setup, I underexposed by 1/2 stop, set my small gridded softbox to the full 3 meter height of my light stand, and aimed it at his head height. I used the light meter to power the flash so it was properly exposing the face. This would give me a bit of focus on the face, without too much of a light intensity difference.

Once that was set, it was just a matter of getting a pose and expression I was interested in.



This image shows the before and after of the post work. I found the image overall was a bit too bright, and the wall lacked volume because the day was fairly overcast. I used the adjustment brushes in lightroom to make the top edges of the boulders pop, and another to deepen some of the undersides of ivy and boulders. Then I took it into photoshop, gave a bit of white sleeve to his left hand so it would look more balanced, then underexposed the whole image another small amount while leaving the face untouched. I cloned out the few small imperfections on the face not visible at this resolution, and went through my normal sharpening procedures to give more micro contrast.

Monday, November 15, 2010

camera_and_light_gear_advice

Too long since a post, so I'm going to do a quick one based on some thoughts I've had this week from speaking about gear in a few forums. I have a shoot coming up this week I will post more real photography on, so never fear.

As photographers we can really get caught up in gear. It's so easy to believe our inability to improve is related to the equipment we own, when in reality the cheapest digital camera is in many ways better than high end cameras of yesteryear. We are limited only by our skills. I have lately forced myself, whenever I get bitten by the gear-bug, to instead of researching or pouring over online catalogs and reviews, to plan a photo shoot idea, and go out and shoot instead. Practice, a photo trip, or a new book (be it instructional, or inspirational) will do far more for our skills than a new piece of equipment.

That said, I want to lay out what I think the basics are, in case you don't have a kit yet at all, or in case you are wondering if there truly is a limiting factor on your current gear. This is assuming you shoot in a similar vein as this blog, mostly portraiture where you control the model placement and can zoom with your feet. None of this will apply to bird photographers or sports journalists.

A camera with wide, normal, and tele lens options.
A light source of some type with at least one constraining option (like a snoot) and one softening option (like an umbrella or softbox) and a way to trigger it.

Wide for me is 35mm, but some people like 24/28mm.
Normal is between 45-60
Tele is over 70, and for me is 85

The reasons for this is your composition. You can keep your subject the same size between wide/normal/tele and totally change what you see in the background. When you want a sense of location, you use wide or normal, and when you want isolation, or a very specific chunk of background, you use the tele, which will also enable closeup portraits without distorting the face.

The light is so that you can brighten portions of your subject, or bring a more pleasing light pattern for it. It's not necessary all the time, but having even a cheap LED panel can really open options.

If I were building a kit today from scratch with my current knowledge and preferences, here is what I would buy.

Perfect kit without waisting money:
Canon 5D I or II
35mm 1.4, or f/2
50mm 1.8
85mm 1.8
Elinchrom Quadra with silver umbrella large/small, softlighter II 60", and XXS softbox and grids, large reflector with 8 degree gridspot insert.

A more budget option would be to go with any decent crop body of any manufacturer with the tamron 17-50mm 2.8 (giving you from wide to tele of good quality and decent lens speed) with a shoe mount flash, or an alienbee setup with vagabond.

The cheapest route would be a Canon s90, and a cheap shoemount flash on a stand, with a white umbrella, and an optical trigger (set off by the s90's flash, just turn flash compensation down so it's as dim as possible)

Remember, we are in this to make photos. Gear can be a hobby on it's own, but then you're not in the business of making images to communicate, you're a collector. Focus on shooting more, pursuing ideas, and use the gear-bug to refocus your efforts on shooting.

Wednesday, October 20, 2010

Noise Reduction



I wanted to share my noise reduction techniques. I don't personally like a lot of noise reduction, because noise can imply sharpness, but there are a few times it's necessary because of how extreme and attention drawing it can be. Above is the final image after denoising. Here is the original:
P1185792

In order to really show the steps, I've cropped in to the center area so I can show you the results at 100% 1:1 pixel ratio. Here is the original image with no luminance noise reduction. I like Lightrooms color noise reduction, and leave it on 7 for up to ISO 800, and up it to 12 for ISO 1600 (your camera will require different settings, slide till the color noise becomes un noticeable).



Next, I duplicate the entire layer, and use Filter > noise > reduce noise and slide it to maximum affect, with sharpening at zero. The image is a bit mushy but has a lot less noise.


Next, I use the layer itself to mask it's visibility. Complicated, but I will try to break it down:

  1. I copy that de-noised layer into the clipboard. (ctrl+a for select all, then ctrl+c for copy).
  2. Then, I add a layer mask, see here for more, and alt+click on the mask so I am "inside" the mask, it will be all white.
  3. I use paste (ctrl+v) to paste the image into the mask. Now you have a black and white version of the layer in the mask. Masks work by showing the rgb of the layer when the mask pixels are white, and hiding when black, with opacity varying by the shade of grey. The problem is that when you paste, it will show the dark areas and hide the light areas, and we want the reverse.
  4. Hit ctrl+i to invert the mask.


What this does, is it reveals the denoised layer in the shadows, and hides it in the highlights. The image itself controls the masking. The reason this works is that properly exposed areas (the light areas) tend to show detail better and noise is less offensive. De-noising these areas kills details. However at high-ISOs shadow areas tend to lack detail and have lots of noise, so denoising these areas tends not to have as much of a blurring affect. By using the image itself to mask the noise, you get a perfect light to dark transition of full noise reduction in the shadows, to none in the highlights. You can even paint further into the mask with a brush, or use curve/adjustments for fine tuning the cutoff of noise reduction.



Better, but the dark areas still have too much noise, it's especially evident in the background blurry areas from using a large aperture lens. A normal gaussian blur destroys too much detail, so I use a smart blur. This will vary per image the values you need, but you want to blur to the point all the noise in the smooth pools of solid color disappear, and adjust the other settings to that the details and hard lines of the actual sharp areas remain.


Smart blur however leaves too hard of edges for what we want, so then I do a gaussian blur with a small enough value to just smooth those hard edges created by the smart blur. This results in an image completely devoid of noise, but much less blurry than using plain gaussian blurring to obscure it.


Next, I use the "blend-if" layer blending option to reveal this noise-free layer only in the darkest areas. I covered blend if earlier on the blog. The settings I used are below, but you can easily adjust to taste.



I duplicate the noise free layer a second time, and remove the blend if options so everything is showing, add a mask, and invert so that nothing is showing. Then using my judgement, I use a 40% opaque brush, and remove noise in areas that are glaring in the image. Just look at the whole thing and see where your eyes go to noise wise, and paint into the mask on those areas until it's acceptable. Most of the times it's the areas that are large areas of solid color.


Next, I proceed with my standard sharpening procedures to get the final result.



Tuesday, September 21, 2010

blend_if_blending_options_in_photoshop


Photoshop has some very powerful blending options available. One often overlooked part is the "blend-if" feature, to control what is shown or affected based on the brightness of each pixel either of the current layer, or of the layers below. This video walks you though using the blend-if feature.

The video explains it clearly, but as a visual aid, double click any layer, and this Layer Style dialog box will pop up. The blend-if function is at the bottom where I've surrounded it in a pink box in this image. You can blend-if using the current layer's (the one you double clicked) brightness values, or those of the underlying layer.


Click and drag on the arrow you want to affect, (yellow box) Black arrow adjusts from the dark end, and white from the light end. To separate, which gives you a smoother transition, alt+click and drag on one side of the arrow to separate them. (orange box) This starts the affect at the inner most arrow, and slowly fades to full affect till the value reaches the outer most arrow. If you drag it till they meet, they snap together again and you'll have to alt+click to separate them again.



Friday, September 17, 2010

band_promo_cover_video_tutorial

Fiona-1

Settings: In each individual shot, ambient is underexposed almost completely. There is one flash in a 1.5 meter softlighter over head, it's set to expose properly at head height, and then falls off down the body. There is also a giant 1x2 meter silver reflector angled up, on the ground in front of them, this provides the fill from below. The background plate was taken properly exposed with regular room lighting.

band promo cover compositing tutorial from Ben Mathis on Vimeo.


I said I was going to make a video of my compositing workflow for this shot, and I finally did. (I needed a microphone). I used audacity to noise reduce and normalize the volume, so it should be easy to listen to. The movement through the process is rather quick, so any areas that are unclear, please post a comment and I can do a follow up in-depth video on one of those aspects.

More advanced topics used in the video are covered here: Masks

The background plate was taken with a tripod so I could use f/8 (the sharpest aperture on my camera body and this lens) at iso 100 (for maximum dynamic range). I think the exposure time was 1/10 of a second, far too slow to hand hold.

Friday, July 16, 2010

diCorcia dissection


Marc Jacobs shot by Philip Lorca-diCorcia for W Magazine:

Someone posted this image in a photograph forum I frequent. At first I just posted, I like it, the lighting is so evocative, and clicked post. But last night I realized that was just a cop out art student level critique, and I should go in and explain a bit more in depth and so I did an actual reading of the photo. I'm going to cross post it here.

The turquoise/orange color contrast has always appealed to me, as it's a contrasting color arrangement that doesn't seem to really work with pigments often, but when done with light it's really contemporary and can have a great affect of "volumizing" because of the contrast. The bathroom and closet are orange, the midground of the guy is turquoise, then the girl (is it even a girl? I can't tell at this resolution. It looks like it should be a girl, but the arm is kind of manly) is orange again. This lends a lot of depth to the image by vibrating between the two colors.

The scene itself, kind of a morning after vibe, in an upscale hotel. You can see suitcases in the closet, and the bed style plus photo over the bed says more hotel than bedroom in a house. You can tell it's upscale by the nice photo and fabric print, but the key clue is the closet that is only lit on the bottom where the coats hang, leaving the top part unlit. This also makes me remember that almost every light source is probably an actual flash, no ambient on a production of this scale, so either diCorcia copied it exactly, or had the foresight to engineer this detail.

Every light source is soft except that hitting the man on the bed corner. The fact it's hard, it's rim, and it's blue, gives him a hard, cold and calculated feel, almost remorseless for whatever debauchery he was up to hours previous. You also have the fact that he's dark on a black background, so he would be lost, but the harsh rim light gives silhouette and the hard long shadows on the bed draw your eye to him. You get two strong focal points, the figure in the bed in the bottom right, and him sitting on the edge in the upper left. There are so many compositional elements adding depth to this image.

The whole thing is luxurious, moody, and hints at an entire story. I love it.

Thursday, July 1, 2010

alejandro_lighting_dissection


I really loved the newest Lady GaGa music video (what gay man didn't?) but beyond the tight bodies and amazing costumes and dance moves, was some really phenomenal lighting. After the 4th or 5th watch through I started trying to figure out some of the lighting setups.


First scene that intrigued me was this tight framing of her face toward the beginning. The razor sharp shadows tell me it's a tightly controlled spot light, and it's aimed perfectly so it doesn't hit her head. This gives attention and lighting to her face, but lets the crazy head gear lighting show, as well as the background lighting create a framing device. It gives it a very otherworldly feel by using light in the main portion, then shadow framing it, then light again framing that. Most lighting schemes either leave the subject lit and background unlit, or the subject unlit and the background lit. The times when it is lit > unlit > lit, the ratios are much closer, creating volume but not this level of contrast. The other thing to note, is while the goggles leave a jet black shadow, the nose doesn't leave any. This requires very precise positioning, because if the light was moved up or further to the right, you'd get a very black very hard edged nose shadow from it. This probably also means her face is very, *very* heavily powdered to prevent any specular shine on her skin.



The scene I liked the most, however, is the above. Very difficult lighting to pull off on a scene this size with so many subjects. My best guess is a huge softbox, large enough to cover the entire stage area, probably 10x20 meters, and potentially gridded or with barn doors to prevent spill (the floor going quickly to black is what makes me think this). I think it's a large softbox because of how soft the shading is, and how even it is on each person and no matter how they move throughout the space of the scene.

What is very likely is the size of the space being huge to prevent light leakage from illuminating the background. One thing that gives these scenes their signature look, is the soft overhead lighting, on a pure black background. This is most likely a stage in a large hanger or warehouse. By having the background being far away in all directions, you don't get any bounce contaminating the shadows on the subjects, and you don't get any light on the background, allowing it to go to black.

I liked this look so much I decided to try it out myself.

IMG_7127.jpg

This is my 1.5 meter softlighter directly over head. I have lowish ceilings or I would have put it higher, which would have resulted with similar levels of shading, but less falloff from head down to feet. Because I also have a small room I was working in, the background is actually a black paper background. The setup is similar though, in that it's a soft, overhead source, large enough to cover the subject, but controlled so it doesn't hit the background.

I think again this is a brilliant lighting decision in the original GaGa video, because it's the type of lighting we don't normally get to see. The most often occurring soft lighting is on overcast days, but it then comes from all directions, and backgrounds are also hit, ensuring everything is soft. Sometimes we get soft window lighting in houses with dark interiors, but then that lighting is from the side. It's only in controlled lighting environments that you can get soft overhead lighting, but with dark backgrounds. This gives it a highly elevated distinct look, separating it from the lighting achievable from most music videos without unlimited budgets.

Sunday, June 27, 2010

diy_quadra_cables



The Elinchrom Ranger Quadra comes with 2.5 meter cables in the kit, or when you buy a new head. There is also a 5 and 10 meter cable, but the 10 meter is currently 140 USD without shipping, a ridiculous price for a cable. I managed to hunt down the supplier of the end connectors, the US supplier is Binder USA, and create my own do-it-yourself Elinchrom Ranger Quadra cable. If you want the straight ended male and female like I have used in this cable, you order parts:
99-4226-00-07 Series 693-2 Connector (both images are incorrect on the webpage, but these are definitely the correct part number for what I ordered, copied from my invoice)


Anyone interested in the hunting process, read this paragraph, if not, skip to the next. I asked around as to what these type of cable connectors are called, 7 pin amphenol connectors with a semi-round master key. I google image searched this phrase, and browsed till I found similar images to mine. In these pages I found a reference to a swiss manufacturer of Amphenol connectors, and as Elinchrom is swiss I figured I might have a lead. I then googled for this manufacturer plus amphenol in google image search and found much closer images and found the US dealer. The actual logo on the OEM quadra cables is of this dealer, so I knew I had a hit. I ordered a male and female connector for 12 USD each, plus 3 dollars shipping to a friend who was coming to iceland and brought them.

After I took delivery of the cables, I asked my father in law to create a 7.5 meter cable for me. I wanted to be sure the part worked before I blogged about it. I did a full shoot with it plugged into both A and B ports, using the modeling light, and doing multiple full power pops. It's a perfect copy of the official cable for 30 USD. (he scrounged a cable, and your price will vary based on length, the longer the length that you make, the more you are saving on the official version). He used a cable where the interior wires were the same diameter as the solder points, but since he did it, I'm unsure of the exact wire diameters or if they are multi strand or solid core. The cable has to be 7 wires (6 plus ground) and they are exactly 1 to 1 in connection (meaning male pin 1 connects to female hole 1).


Here are both OEM and my ordered cable ends next to each other.

Again, showing they are identical.


The straight ends are different than the L ends, but they connect, and the straight end looks exactly like the connector on the Quadra power pack itself. These cables use the exact identical part number as the OEM versions, for a fraction of the price if you can solder or know someone that does. They plug into each other, and into the pack itself. I can plug all 3 of mine in for a total of 12.5 meters (7.5 + 2.5 + 2.5). Apparently the only length with no light loss is 2.5 meters. I count this as a benefit as you can bleed lower than the lowest 8.2 watt setting with all 3 plugged together. If you need to use a long cable plus one at full 400watts, just use the 2.5 meter to your 400 watt head, and use your extension cable to get to the 2nd head. This should also give closer to a 3:1 or even 4:1 ratio rather than 2:1 giving you more control over ratios even when you don't need extra length.

*edit* After testing, using just the 7.5 meter cable loses you .2 stops of light. Adding one stock 2.5 meter cable for a total of 10 meters gives you .3 stops of light, and adding another stock 2.5 meter cable for a 12.5 meter length gives you .4 stops of light.

There you have it, a diy quadra cable of any length for a fraction of the cost of the stock cables.


Monday, June 14, 2010

zen_shoot

sindrisvan-3.jpg

Settings: 1.5 meter softlighter to camera left and halfway between subject and camera, aimed at head and centered at head height, about 3 meters from subject. Metered at head to be properly exposed. Background was shutter dragged to come up to proper exposure as well.

I had asked this subject if I could photograph him over a year ago, and it just worked out this weekend to do a shoot. I had some locations in mind, and did a 1.5 hour location scout with my camera, 35, and 50mm lenses. Luckily I did this right before the actual shoot, so the lighting was identical between scout trip and the shoot itself. Doing a location scout is really pivotal. You don't want to feel rushed with the subject or you could miss some nice background elements trying to just find something quick. I pick locations based on "feel" and our eyes can take in a huge field of view, plus we are viewing "live". It takes exploration to find a single view for your camera that encapsulates this same "feeling" that you chose the location for. By having plenty of time by yourself with no lights, just your camera, you can find these views a lot easier. I'm constantly putting the camera up to my eye without taking a photo, just looking how things are compressed and what shows from that angle.

For the above shot, I loved how the trees went back into the background, and the serene feeling of the bare ground with just pine needles. This is a very uncommon setting in Iceland, tall trees like this and bare ground with no grass or weeds. I knew this was spot number one for the shoot. I experimented with different heights of the camera during the scout, and I knew I wanted my 35mm lens so I could see up into the trees, which would necessitate a low angle. The 50mm narrowed the view too much and you didn't get the same sense of height. I wanted a nice soft side light, so I used the 1.5 meter softlighter. I metered for the face, and then opened the shutter until the background came into a nicer exposure, 1/60th of a second. The rim light on his left side is from the bright sky coming through the open area of the tree trunks above, behind, and to the right.

In post, all I did was create a gradient adjustment in Lightroom for the top of the trees, which I boosted exposure by 1 stop, and made a bit more saturated, and added a slight orange color overlay to give it the sunny feel. The left side of this copse of trees had a road, where people were walking and cars driving, so in Photoshop I duplicated the layer, flipped it, and masked in just enough to show bushes on that side as well. I left as much of the original trees as possible to keep it from looking mirrored. I also made an adjustment layer for the ground, darkened it slightly and added more red so it wasn't so yellow.

sindrisvan-1.jpg

This location was very close to the first, and uses all natural light. This is the main cemetery of Reykjavik, and it is an incredibly peaceful place. There are trees planted on most graves, and since the cemetery itself is about 150 years old, some of them are quite large. It's the most dense large forest in the capital area. This location was the hardest to scout. I wanted to capture the depth of the forest, and the serenity, without it being too cliche as a cemetery portrait location. I wanted peace, not morbidity. This tree was one of the more dense in it's foliage, and as such created the darkest area of the cemetery. I knew if I put the subject under it and facing out, I could get some nice soft light with decent shadows on the side facing the tree. We took a few shots of him looking toward me, but I had him look outward, and his profile looked great. I made sure to line it up so it was on top of the dark branch, to truly show the silhouette, and grabbed this image. It should really be viewed large to really appreciate the details and tonal depth. I love the composition of having the dark side and light side, but his sleeve and face serve as the main light spots in the dark half, properly drawing your eye to the foreground. His sleeve and the tree branch behind his head make a smooth S-curve with his face in the middle. The photo was mainly about the tones and composition, and I felt black and white treatment was more appropriate and would really let me draw out the details I wanted. The main color was the green of the foliage, his outfit was all grey and white, so the color version doesn't bring much.

Here are the other favorites from the shoot, all using natural light.

sindrisvan-2.jpg sindrisvan-6.jpg sindrisvan-5.jpg

Monday, May 31, 2010

mexican_lights

mexico_self-1

Settings: Background is properly exposed, flash into 1.5 meter softlighter II to camera right, with the light meter at face level powered to expose properly.

Agust and I went to Puerto Vallarta, Mexico last month. I actually lugged all of my studio lights down there for a photoshoot that didn't really pan out, but I went in knowing that might be the case. I made sure to use them anyway. The above photo used just the 1.5 meter softlighter. One problem is that the outside and inside are such different light types, the outside being harsh sunlight, and me being lit softly, that it looks composited or cut out. The fact they are even in brightness and focus is also contributing. This was intentional, as I wanted the outside to be clear and well lit to show just how nice the hotel and our balcony view was. In addition, it was unavoidable without neutral density filters. to properly expose the outdoors while staying under my sync speed (1/160), I had to go to f/11. This means that foreground and background on a 35mm lens (what I used) would be sure to be both in focus, even with the extreme distance from subject to distant background. If I did want a blurry background, a neutral density filter over the lens would let me increase the aperture. This is also a reason I'm glad I have the power of the Quadra, as I needed about 3-4 hotshoe flashes worth of power to equalize subject and background.

One thing I could have done, and did do for a later shot, is add a rim light. By adding a hard rim light, it reads visually as the sun coming onto the subject, which unifies the lighting, making for a less composited look.

agust_mexico-3

Settings: Background is overexposed by half stop, flash into 1.5 meter softlighter II to camera right, with the light meter at face level powered to expose properly. 2nd flash through reflector with 20 degree grid behind subject to camera left, also properly exposed.

This blends much better with the outside exposure. The slight over exposure is what you expect from looking out a window, and the harder rim light feels like it could be the sun hitting the subject's head.

With both of us in the image, I wanted to use the window and blinds as framing elements, to show that it's on a balcony. This served as our vacation snap from the trip, and while I knew it would look partially cut out with both fore and background perfectly lit and in focus, I wanted both subjects to be prominent and clear. By using such a large source, I was able to keep it a little back and still get soft light, ensuring both of our heads would be the same exposure despite being different distances from the light. (the closer the source is, the more affect different distances from the light will have because of falloff. If the light was only 20cm away from the closer subject, 20cm between our heads would make 40 vs 20cm, for half the light, but with the light 2 meters away, it was 2 meters vs 2.2 meters, such a small difference as to be unnoticeable)

b&w-1.jpg

Post was minimal. Some contrast adjustments, and bumped both the blue and green colors so the sky and trees would pop a bit more.

Tuesday, May 25, 2010

red_heads_series

red-1

Settings: Main light through a 1.5 meter softlighter, and is metered to proper exposure at his face. 2nd light is behind a white diffusion panel, aimed into the camera, and meters also at proper exposure.

From the numerous shots of my husband, one might be able to ascertain my affinity for red-heads. I find the features fascinating, the trending toward pale skin, freckles, what the light colored eyebrow hairs do to the reading of a face, and the often green eyes. I just think red headed people are fascinating in their anatomy, skin tones, and differences from the rest of the pigment gamut. I decided to put my fetish toward a new photo series. One might think I'd start with my husband first, but I had an opportunity to shoot a stranger first, more shots will follow in this series.

The lighting goal was to keep the focus on the features. Soft, revealing light, and a pure white background so as not to distract from the features. I kept a slight falloff of focus to give it a sense of immediacy. An all in focus image would have been a bit too clinical. I used my 85mm lens to make sure there wasn't any distortion of the facial features, and a benefit is that at f/3.5 this lens is nearing it's ultimate sharpness, giving crystal clear sharpness to the details in focus.

To achieve this lighting, I used 2 lights, and to get a pure white background, I used a very convenient approach. The first light is in my giant 1.5 meter softlighter, directly over the camera and about even with the lens, placing camera and light about 1 meter from the subject, with the light raised above and aiming down. This provides soft even lighting with some volume from being raised. If it were even with the camera in height, the light would be more flat. Now the kicker, is the 2nd light. I have one of my 1x2 meter panels with diffusion material behind the subject about 1 meter, and the 2nd light is behind the panel aiming back through. This means rather than trying to evenly illuminate a white paper backdrop, I'm lighting up a diffusion panel from behind. This is similar to the lastolite popup white background, but works with my existing equipment. By keeping it a bit behind, I avoided flare. If you pump too much light off or through your white background, you can create a contrast reducing flare. I used the B head from my quadra, so it's half the output of the main light, but since the diffusion panel eats up less lighting than the softlighter, they are even in light output. This results in a proper illumination of the face, and since the diffusion panel is white, proper illumination of it ends up with solid white background.

Post processing was mainly to remove a few tiny blemishes, and really enhance the contrast. I wanted to avoid an over baked look, but really get some details popping. This resulted in a lot of back and forth between curves, and then fine tuning the saturation sliders to make sure the shadows didn't go too burnt in redness. I toggled between color and black and white a lot to make sure I got the full range of contrast, this is more evident in B&W, so by changing over to that you can see how your value range is, then switch back to color to make sure the saturation levels work with your adjustments. The other really important thing is White Balance. Skin tones and hair color is really important for this series, so I had to be absolutely sure of color neutrality. One thing I love about my Quadra is it's color consistency at all power levels, but working on a color calibrated monitor was pivotal to making sure it was perfect.

Tuesday, April 13, 2010

lilja_in_the_greenhouse

lilja_greenhouse

Settings: Ambient read at f/1.4, and the flash aimed at just her face was at f/1.8

A quick one from this afternoon. My friend Lilja has bright red hair, and always has the coolest outfits on her facebook photos. I saw the polka dot tights and knew I had an image somehow. We were originally going to go into the woods for the shoot, but it started to look like rain. A friend had a greenhouse, and it quickly went from a proposed plan B to the best idea.

I had seen a magazine on the racks here in Iceland with what looked like a tintype image, and I was inspired at the color of the processing, and the faded colors of the image. I knew her bright red hair and the dress we had picked out would survive this processing, and would probably be made stronger because of it.

For setup, I put my black 1x2 meter frame just outside of camera left. This is serving to darken the shadows on that side. The greenhouse was glass on all sides, and it was an overcast day, there was almost no contrast or shadows inside the structure. The black board introduced a bit of contrast, but to properly expose her face, I had to totally blow out the background, which I did not want. I wanted the softest setting of my lens with the shallowest depth of field, so I locked it to f/1.8. At iso 100 and shutter speed of 1/125, this gave me f/2 where her face would be, too bright for what I wanted. Knowing that I was using the light tightly gridded to her face, I could go way above the sync speed.* I bumped the shutter to 1/250, taking the ambient to f/1.4.

Next I put the quadra on a boom, using the grid reflector with a 20 degree grid. This gave me a very tight beam of light, tighter and harsher than my softbox. I wanted to contrast the soft light of the rest of the image, and I knew I was going to use some softening post processing techniques, so the harder lighting would help the face still read when I was done. It was drizzling the entire time, which made me so glad I was using the quadra system, which is largely weather sealed. I put the cable in plug B, and lowered it to the lowest setting of 8.2. This gave me a reading inside the greenhouse where her face would be, of f/1.8, right where I wanted it.

Because of the light meter usage and the tripod to find my exact camera angle, once the model came out it was very fast. I directed her pose, (as an aside, I cleared the view of all modern day looking things like plastic bags of dirt and colored buckets, always control your scene), had her tilt her head in the direction I wanted, and fired a test. I could see the light was not far enough around to give me narrow lighting, it was more like a rim light, so I moved the boom to be closer toward me, and it hit both eyes for the look I wanted. We were done with the actual shooting bit within 10 minutes.

For post processing, I new I wanted to absolutely destroy the corners. First I used a lens blur set fairly low, and masked her out roughly. The items within the greenhouse were too contrasty and pulling focus from her, and this helped clear it up. Next I used a radial blur to really smear the corners the way a crappy lens does. I completely masked it away from her face though. Next I did a lot of color stuff. I made the shadows bluer, the highlights yellower. I made a blue/green layer that only went on the low shadow tones, but not the blacks. Then I made a desaturated green layer, set it to lighten, and only let it touch the deep blacks, effectively taking away the contrast of only the low end of the image, a typical look of antique photos. Finally I found a stain texture and a glass plate texture which I overlayed lightly to give it a bit of texture as if it were on paper. The whole goal was a contrast between a high quality center, with destroyed edges, and a desaturated fatigued look of the colors, with her hair and dress still shining through by virtue of their saturation.

*once you go above your maximum shutter speed (on the 5D it's 1/200, but with a skyport it's effectively 1/160 because of delay) you start to see the shutter blocking the flash on the image. however, that's only on the lower part of the frame, and it gets progressively higher in the frame the higher you go over the sync speed. If the area where the flash is hitting, is high in the frame, you can disregard the shutter creep shadow, because it's not evident anyway. In this image, her face is the only part getting flash, and it's "high" in the frame. I would have probably had to go to 1/320 to start to see the shutter creeping onto her face and blocking the flash.